Comments for iQlusion.org https://iqlusion.org Just another boring blog. Sun, 20 Nov 2016 21:56:14 +0000 hourly 1 Comment on How to Flash a Thinkpad X200 with Libreboot by iQlusion https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-8 Sun, 20 Nov 2016 21:56:14 +0000 https://iqlusion.org/?p=29#comment-8 I have not used YwRobot. There are several things that could be causing it to be unable to read the chip, all I can suggest is to double check all the wiring.

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by aaa https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-7 Thu, 17 Nov 2016 12:49:41 +0000 https://iqlusion.org/?p=29#comment-7 Have you got it working with YwRobot? I use the same PSU, and all I get is “No EEPROM/flash device found”. I’m not sure if that’s due to PSU or I messed up somewhere.

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by iQlusion https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-6 Mon, 12 Sep 2016 21:05:27 +0000 https://iqlusion.org/?p=29#comment-6 The pin marked #1 from my diagram actually connects to a ground on the Beaglebone Black, you would need to connect the pin marked #1 to the ground for the Bus Pirate (http://dangerousprototypes.com/docs/Bus_Pirate_I/O_Pin_Descriptions). You shouldn’t use any 3.3V from the Bus Pirate and I do not think there would be any issues with not using the redundant ground from the PSU to the Bus Pirate (I am not 100% about this, I am researching this now).

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by b https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-5 Sun, 11 Sep 2016 05:50:27 +0000 https://iqlusion.org/?p=29#comment-5 I am confused by the x200 flashing tutorials:
https://libreboot.org/docs/install/x200_external.html

I have bus pirate and YwRobot breadboard PSU. I connected 3.3V from PSU to bios chip, and ground from psu to bus pirate. I have two pins mentioned in the guides, but not explained how to connect – BIOS chip ground and bus pirate (or BBB) 3.3V.

Where do I connect bios ground? What do I connect the 3.3v bus pirate pin to? The instructions for the other connections (MISO, etc) are clear.

Thanks for any help you can give.

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by iQlusion https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-4 Thu, 07 Apr 2016 23:30:50 +0000 https://iqlusion.org/?p=29#comment-4 It was a buy off ebay and I sold it already. Not too worried about someone using the MAC address.

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by mmkay https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-3 Thu, 07 Apr 2016 22:21:44 +0000 https://iqlusion.org/?p=29#comment-3 Change your MAC address!

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by iQlusion https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-2 Fri, 18 Mar 2016 16:13:17 +0000 https://iqlusion.org/?p=29#comment-2 Thanks for the concern, however I don’t mind if someone steals it and it was never registered to me either.

]]> Comment on How to Flash a Thinkpad X200 with Libreboot by yeahright https://iqlusion.org/index.php/2016/03/01/x200-libreboot/#comment-1 Thu, 17 Mar 2016 14:17:47 +0000 https://iqlusion.org/?p=29#comment-1 Although I doubt it matters for the people interested running libreboot, you should probably blank the Windows key in the first pic.

]]>